Granite Surface Plates

Product Details:

GRANITE SURFACE PLATE (As per IS 7327  2003) 

 

             NTMT Granite Surface Plates are as a precision datum base for

Inspection, tool marking, gauging, spotting, marking and layout operations.

 

    MATERIAL:  Granite surface plates are made from selected granites with uniform distribution       of light and dark constituents. It has a fine grind, non porous texture and grind size measures less than 1 mm. It has a constant hardness throughout 6 to 6.5 moss scale and 3 times harder than cast iron surface plate. It has very lowest thermal co-efficient of expansion, 100% rust proof and acid resistance, non electric-conductive and easy to clean. Maintenance costs are practically nil. If may chip but cannot develop a burr.  

 

TECHNICAL DATA: Granite surface plates are manufactured in 4 grads of accuracy.

          > Grade 00 (Laboratory Grade)   as per DIN Standard only

          > Grade 0   (Inspection Grade)    as per IS 7327 - 2003

          > Grade 1   (Tools Room Grade) as per IS 7327 - 2003

          > Grade 2   (Shop Floor Grade)   as per IS 7327 2003

          > Grade 3   (Workshop Grade)     as per IS 7327 2003

 

ACCURACY: Granite surface plates are hand lapped and finally by experienced technicians. Final inspection is carried out by high precision Electronic level with computerized software method to meet the requirement of IS 7327:2003 and also provide NABL Accreditation Certificate.

 

Additional Information:

• Production Capacity: GR-O-2016

Product Details:

 PRODUCTS RANGE

 

   NTMT Specialized for Manufacturing Precision Inspection Equipments Covering   Flatness, Straightness & Squareness Measurements.    

 

 

            Some of Our Range Of PRODUCTS Are Listed Below                               

 

1.  GRANITE SURFACE PLATE

 

2, GRANITE & STEEL PARALLELS

 

3, GRANITE ANGLE, SQUARE BLOCK

 

4.   CAST IRON SURFACE PLATE                                              

 

5   CAST IRON ANGLE PLATE, BOX ANGLE PLATE  

 

6.  COMPARATOR STANDS

 

7.   BENCH CENTRE

 

8.  CAST IRON STRAIGHT EDGE (I SECTION, CAMEL BACK, TRI ANGULAR)

 

GRANITE SURFACE PLATE (As per IS 7327  2003) 

 

             NTMT Granite Surface Plates are as a precision datum base for

Inspection, tool marking, gauging, spotting, marking and layout operations.

 

    MATERIAL:  Granite surface plates are made from selected granites with uniform distribution       of light and dark constituents. It has a fine grind, non porous texture and grind size measures less than 1 mm. It has a constant hardness throughout 6 to 6.5 moss scale and 3 times harder than cast iron surface plate. It has very lowest thermal co-efficient of expansion, 100% rust proof and acid resistance, non electric-conductive and easy to clean. Maintenance costs are practically nil. If may chip but cannot develop a burr.  

 

TECHNICAL DATA: Granite surface plates are manufactured in 4 grads of accuracy.

          > Grade 00 (Laboratory Grade)   as per DIN Standard only

          > Grade 0   (Inspection Grade)    as per IS 7327 - 2003

          > Grade 1   (Tools Room Grade) as per IS 7327 - 2003

          > Grade 2   (Shop Floor Grade)   as per IS 7327 2003

          > Grade 3   (Workshop Grade)     as per IS 7327 2003

 

ACCURACY: Granite surface plates are hand lapped and finally by experienced technicians. Final inspection is carried out by high precision Electronic level with computerized software method to meet the requirement of IS 7327:2003 and also provide NABL Accreditation Certificate.

 

Additional Information:

• Production Capacity: 100 per month
• Packaging Details: for transportation rubber wood case.

Product Details:

NTMT Granite Surface Plates are as a precision datum base for

Inspection, tool marking, gauging, spotting, marking and layout operations.

 

    MATERIAL:  Granite surface plates are made from selected granites with uniform distribution       of light and dark constituents. It has a fine grind, non porous texture and grind size measures less than 1 mm. It has a constant hardness throughout 6 to 6.5 moss scale and 3 times harder than cast iron surface plate. It has very lowest thermal co-efficient of expansion, 100% rust proof and acid resistance, non electric-conductive and easy to clean. Maintenance costs are practically nil. If may chip but cannot develop a burr

Product Details:

PRODUCTS RANGE

 

   NTMT Specialized for Manufacturing Precision Inspection Equipments Covering   Flatness, Straightness & Squareness Measurements.    

                     

                 

            Some of Our Range Of PRODUCTS Are Listed Below                               

 

1.  GRANITE SURFACE PLATE

 

2, GRANITE & STEEL PARALLELS

 

3, GRANITE ANGLE, SQUARE BLOCK

 

4.   CAST IRON SURFACE PLATE                                              

 

5   CAST IRON ANGLE PLATE, BOX ANGLE PLATE  

 

6.  COMPARATOR STANDS

 

7.   BENCH CENTRE

 

8.  CAST IRON STRAIGHT EDGE (I SECTION, CAMEL BACK, TRI ANGULAR)

 

 

 

 

 

 

 

 

 

 

 

 

                                           PAGE 3 (1)

 GRANITE SURFACE PLATE (As per IS 7327  2003)

 NTMT Granite Surface Plates are as a precision datum base for

Inspection, tool marking, gauging, spotting, marking and layout operations.

 MATERIAL:  Granite surface plates are made from selected granites with uniform distribution       of light and dark constituents. It has a fine grind, non porous texture and grind size measures less than 1 mm. It has a constant hardness throughout 6 to 6.5 moss scale and 3 times harder than cast iron surface plate. It has very lowest thermal co-efficient of expansion, 100% rust proof and acid resistance, non electric-conductive and easy to clean. Maintenance costs are practically nil. If may chip but cannot develop a burr.  

TECHNICAL DATA: Granite surface plates are manufactured in 4 grads of accuracy.

          > Grade 00 (Laboratory Grade)   as per DIN Standard only

          > Grade 0   (Inspection Grade)    as per IS 7327 - 2003

          > Grade 1   (Tools Room Grade) as per IS 7327 - 2003

          > Grade 2   (Shop Floor Grade)   as per IS 7327 2003

          > Grade 3   (Workshop Grade)     as per IS 7327 2003

ACCURACY: Granite surface plates are hand lapped and finally by experienced technicians. Final inspection is carried out by high precision Electronic level with computerized software method to meet the requirement of IS 7327:2003 and also provide NABL Accreditation Certificate.

Product Details:

We do manucturing of Granite surface plates, Cast Iron Surface plates, Bench Centre, Angle Plate , Box Angle Plate, Vee Block, Straight Edges, Engineering Square, Dial Comparator Stand etc as per ISI Specification.

Also we have able accreditation for mechanical measuring equipments and instruments.

Additional Information:

• Item Code: GR-O-2020
• Delivery Time: 1-4 WEEKS
• Packaging Details: RUBBER WOOD PACKING CASE